Introduction

The bag filter housing can be widely used for the filtration in different industries. such as water, pure water, cooling water (cooling tower), chilled water (cold water host of air conditioning), seawater desalination, secondary treatment of city tap water , circuit board, electronics, CD, fine chemicals, edible oil, glycerin, stearic acid refining,Petroleum, amine liquid, paint, resin, ink, chemicals, catalyst recovery, acid and alkali, solvent, lubricating oil

Electrophoretic coating (filtration and oil removal), pretreatment solution, deionized water,Beverage, beer, syrup, filtration and sterilization treatment.hotel water supply filtration and sterilization treatment, western food drinking water, landscape water (clarification, sterilization, taste removal, decoloration, algae), water reuse, pre-filtration before ultrafiltration,etc.

Power plant cooling water circulation filtration, dust removal (dust collection), clean gas filtration, wind transmission system (bag filtration, collection, connection)

Product Specification

AR25-1（Bag Sizeφ180 x 450 mm）

Weight: 28KGS

Max Flow Rate: 25t/h

Effective Filtration Rate: 0.25m2

AR50-2（Bag Size:180 x810 mm）

Weight: 35KGS

Max Flow Rate: 50t/h

Effective Filtration Rate: 0.5m2

AR10-3（Bag Sizeφ105 x230 mm）

Weight: 7.66KGS

Max Flow Rate: 6t/h

Effective Filtration Rate: 0.1m2

AR16-4（Bag Sizeφ105 x380 mm）

Weight: 8.86KGS

Max Flow Rate: 12/h

Effective Filtration Rate: 0.16m2

AR20-5（Bag Sizeφ150 x550 mm）

Max Flow Rate:20/h

Effective Filtration Rate: 0.2m2

How to use bag filter：

Check

a. Open the packing box and check whether the contents in the filter

equipment parameter name plate meet your requirements.

b. Count the number of accessories in the delivery list.

Installation of filter accessories

a. Install the filter outlet pressure gauge (sealed with raw tape).

b. Install the discharge valve (sealed with raw tape).

c. Install the exhaust valve of the filter (sealed with raw tape).

Install the filter seal

a. Install the sealing O-ring of the filter bag protection net.

Before installation, carefully check whether the sealing O-ring is deformed.

Normal sealing O-ring, there should be 30% convex groove in diameter.

b. Put in a filter bag to protect the basket.

Install filter bag

a. Check bag label model. Tear off the label paper and keep it for future reference.

b. Put the filter bag into the concave edge of the filter bag protection net. The opening of the filter bag is higher than the concave edge of the protective screen of the filter bag.Arrange the filter bag and stick it tightly to protect the inner net wall.

c. Tighten the filter bag pressure plate. Check whether the filter bag pressing plate is in the pressing plate ear.

Filter panel installation

a.Before installation, carefully check whether the sealing O-ring is deformed. A normal sealing O-ring should have a groove protruding 30% of its diameter.

b.Put on the panel. Four M16 ring head bolts are evenly tightened in diagonal steps.